spécifications de buse de filtre d’eau et ses applications

Les buses de filtre sont largement utilisés dans diverses industries, particulièrement adapté pour le traitement de l'eau ou filtration liquide. La partie principale de la buse est un tamis métallique en forme de coin en acier inoxydable. Il est un nouveau composant de filtre de type. The filter nozzle has a high precision filtration ability. The minimum slot size is 20 micron.

This term is applied to the components which retain the media and also provide the means for good distribution of water and air (where used). Nozzles may be installed in lateral pipes or in suspended floors. A nozzle has three main components, a strainer to exclude the media or packing gravel, a water control orifice and a tailpipe with an orifice(s) to control the airflow. Nozzles may rely upon the open area of the strainer slots to provide the controlling head loss for good distribution or an independent orifice within the assembly is often preferred. Strainer slots can become partially blocked with media. This will alter the head loss across the slots. If the control orifice is within the body of the nozzle and the slots have a larger open area, there will be less affect by partial blocked slots to the head loss through the nozzle.

Filter Nozzle slot sizes vary considerably from about 0.2mm to around 10mm, larger slots best suited for up flow filters. Slots of 0.2, 0.3 & 0.35mm are commonly used in direct contact with the filter media without the requirement of a gravel layer on top of the nozzles. This direct contact has an advantage for combined air scour and water backwash.